how have you removed window cranks

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33387
Printed Date: April 27, 2024 at 7:00 AM

Topic: how have you removed window cranks

Posted By: Ketel22
Subject: how have you removed window cranks
Date Posted: June 05, 2004 at 10:52 PM

im currently working on a 96' dodge neon and i can't figure out the window cranks, i can't find any pins or screws or anything that is holding it on. any help would be appreciated as ofnow....

-------------
Quad L Handyman services

Replies:

Posted By: silversi17
Date Posted: June 05, 2004 at 11:29 PM

you need a special window crank removal tool. There is a little spring ring inside that holds it on. You should be able to get that tool from your local auto parts store.

-------------

Posted By: auex
Date Posted: June 06, 2004 at 3:12 AM

Torx bit in the center of the handle. Pop the front of the handle off at the point where the handle meets the door to expose the screw.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: mikedawg
Date Posted: June 06, 2004 at 10:34 AM

i gotta 96 neon too man. all you gotta do is grab the crank and pull it towards you. .then with a set of needle nose pliers, pull the retaining pin off. its a "U" shaped piece of metal right between the crank and the door panel. if you got anymore questions about neons, im your man. check out mine sometime. https://www.rankmyride.com/?page=cars/view&CID=3780

-------------
always looking for new info and willing to give it

Print Page | Close Window