Print Page | Close Window

installing viewing window

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33500
Printed Date: February 18, 2026 at 6:47 AM


Topic: installing viewing window

Posted By: insanity44
Subject: installing viewing window
Date Posted: June 08, 2004 at 12:08 AM

ok guys...i am wanting to put a viewing window on my box. i want to know the best way to have a plexiglass viewing window on it.. does it matter how thick the plexiglass is?and how should i put it on the box and how should it be secured



Replies:

Posted By: Ketel22
Date Posted: June 08, 2004 at 12:45 AM

you need to cut and router the edges of the cut to accomidate the window. i would suggest at least a 3/8" plexi most likely you will need thicker depending on the sub. you also need to seal the window when you put it on with sealant and screws about ever 1.5".



-------------
Quad L Handyman services


Print Page | Close Window