Print Page | Close Window

amp install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33557
Printed Date: May 28, 2024 at 9:45 PM


Topic: amp install

Posted By: jtfrog
Subject: amp install
Date Posted: June 09, 2004 at 10:07 AM

Given the specs for the amp below using one 8" sub what would be the best sub? 4ohm or 8ohm single, dual coil.

  • Two Channel Amplification
  • 150 Watts x 2 Output/300 Watts x 1 Bridged
  • Fully Adjustable Electronic Crossover Network
  • Variable Bass Boost (0~12dB @ 60Hz)
  • Soft Turn On/Off Circuit
  • 2 Ohm Stereo Stable/Bridgeable into 4 Ohms
  • MOSFET PWM Power Supply
  • Heavy Duty Aluminum Alloy Heatsink
  • Variable Gain Control/Remote Turn On/Off
  • Hi/Low Gold Plated MOLEX Level Inputs
  • Power On Led Indicator
  • LED Protection Indicator
  • S/N Ratio: >90dB
  • THD: <0.05
  • Frequency Response: 20-25k Hz
  • Overload/Thermal/Short Circuit Protection
  • Dimensions: (LxHxW): 6"x 2.25" x 10.25


-------------
jtfrog



Replies:

Posted By: DYohn
Date Posted: June 09, 2004 at 11:00 AM
SVC 4-ohm sub rated for 300 watts RMS.

-------------
Support the12volt.com


Print Page | Close Window