Print Page | Close Window

is this amp enough?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33649
Printed Date: April 27, 2024 at 3:04 PM


Topic: is this amp enough?

Posted By: AJRXtreme
Subject: is this amp enough?
Date Posted: June 10, 2004 at 5:15 PM

I have 2 12 inch audiobahn AW1251T subs. Here are the specs for them:
  • TWO 12" High Performance Audiobahn AW1251T Subwoofers

  • 800-watts MAX Power Handling EACH SUB (1600W TOTAL)

  • 400-watts R.M.S. Power Handling EACH SUB (800W RMS TOTAL)

  • 45oz Strontium Magnet

  • Freq Response: 30Hz - 1kHz

  • Efficiency: 91.1dB

  • Phat Foam Surround

  • Poly-Coated 2 Layer Non Pressed Non Transfer KM3 Coated-Cone for Virtually No Cone Distortion

  • 2" four Layer Black Aluminum Voice Coil

  • Nice Dual 4 Ohm Voice Coils

  • The Mounting Dimensions: Depth; 5 1/4" Hole; 10 7/8" Diameter; 12 1/2"

  • I need to know if this JBL PowerValve BP-600.1 amp will do the job. I want to get a good amount of power out of my subs but dont want to blow them out.



-------------
03 F150 on 24's
HU:Pioneer DVD5700
Frt:MC57
Subs:(12)S12L7
Amps:(3)KX2500.1's, MC-2004



Replies:

Posted By: Manoftools
Date Posted: June 10, 2004 at 6:06 PM
Those Audiobahn subs will be just fine with that amp.  Though they are rated at 400 RMS, I highly doubt they can actually handle it.  On the other hand though, that amp will definitely not "blow them out"




Posted By: AJRXtreme
Date Posted: June 10, 2004 at 6:22 PM
i also want to know if i will be ok with this Legacy LAMP4 1600 Watt 4 Gauge Car Amp Wiring Kit

-------------
03 F150 on 24's
HU:Pioneer DVD5700
Frt:MC57
Subs:(12)S12L7
Amps:(3)KX2500.1's, MC-2004




Posted By: customsuburb
Date Posted: June 10, 2004 at 6:41 PM

As long at it is an actual 4 gauge amp kit.






Print Page | Close Window