What type of Enclosure do I use?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33793
Printed Date: July 14, 2025 at 4:29 AM

Topic: What type of Enclosure do I use?

Posted By: onsatmex5
Subject: What type of Enclosure do I use?
Date Posted: June 13, 2004 at 10:19 AM

I just Purchasec 2 KICKER S10L7 SOLO-BARIC 10" SUBWOOFERS NEW 2004 SUBS, What type of ENCLOSURE Should I be looking into. I will be using A Kicker 1200.1 amp to push them.

Sub's Can be seen here,

https://cgi.ebay.com/dll?ViewItem&category=39777&item=5703086142&rd=1

Replies:

Posted By: DYohn
Date Posted: June 13, 2004 at 10:25 AM

That link is to a 12"...

It depends on what you are after. I assume since you're going for Solobarics that you want it to be loud, so you'll need a ported anclosure built to the factory specs that will be in the speaker's owner's manual.

-------------
Support the12volt.com

Posted By: onsatmex5
Date Posted: June 13, 2004 at 10:37 AM

Here is the link to the 10's I have been looking at so many I was getting confused... posted_image

https://cgi.ebay.com/dll?ViewItem&category=39772&item=5704638376&rd=1

Print Page | Close Window