Crossover connect question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34003
Printed Date: May 23, 2024 at 10:27 AM

Topic: Crossover connect question

Posted By: Paul_g
Subject: Crossover connect question
Date Posted: June 16, 2004 at 12:22 PM

I just bought JL Audio VR650CSi component speakers for rear fill, and I only want to hook up the drivers to the supplied JL crossovers but not the tweeters. Do I need a resistor between the tweeter terminals on the crossover to prevent damage to the amp or crossover? Will the crossover frequency change for the driver if I don't hook up the tweeters? Please Help!!!

Replies:

Posted By: DYohn
Date Posted: June 16, 2004 at 12:33 PM

It's no problem to leave the tweeters disconnected.

-------------
Support the12volt.com

Posted By: Paul_g
Date Posted: June 16, 2004 at 7:20 PM

Thanks DYohn, I appreciate the help.....my mind is now at ease....

Print Page | Close Window