Delphi radio install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34145
Printed Date: July 14, 2025 at 4:13 AM

Topic: Delphi radio install

Posted By: soonerjaj
Subject: Delphi radio install
Date Posted: June 18, 2004 at 9:57 PM

2003 Jeep Rubicon Delphi FM Modulator install.

What is the best and easiest way to wire the FM MOdulator in this vehicle?

Replies:

Posted By: Javelin3o4
Date Posted: June 19, 2004 at 2:31 AM

well you have to pull the deck to plug in the antenna adapters, so just use the power from the back of the deck, the delphi ski fi uses a 12v ignition and ground, so just test the back of the harness for a 12v switch, or just run a wire from the ignition harness under the dash. Also i belive the jeep will need a special antenna adapter, and reverse ant adapter to plug into the modulator then back into the radio.

Print Page | Close Window