4 ohms OR 2 ohms?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34315
Printed Date: May 17, 2024 at 6:27 PM
Topic: 4 ohms OR 2 ohms?
Posted By: onsatmex5
Subject: 4 ohms OR 2 ohms?
Date Posted: June 21, 2004 at 7:41 PM
I am installing 2, Dual Voice Coil Solobaric L7's,4 ohms subs. What is the difference if I run them at 4 ohms or at 2 ohms? Is one better than the other? They will be running of a 600.1 kicker amp.
Replies:
Posted By: unc2003
Date Posted: June 21, 2004 at 9:51 PM
Well, with 2 Dual 4 OHM Subs, 2 OHMS is not an option. It's either gonna be 4 or 1 OHM.
------------- Before you judge someone, you should first walk a mile in their shoes. Because then your a mile away, and you have their shoes.
Posted By: jeffchilcott
Date Posted: June 21, 2004 at 9:59 PM
Actually you could run it at 8 which would be pointless, 4 which you could bridge on the amp, you best option or 1 which if you bridge this on the amp it would not hold would go into protection or fry, the 600.1 is kinda a small amp to be pushing 2 l7's in my advice as well
------------- 2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: onsatmex5
Date Posted: June 21, 2004 at 10:14 PM
If I get A 1200.1 amp and run them @ 1ohm will my 140amp alternator in my car handle the amp? The subs are 10 inch L7's rated at 600 watts each.
|