Enclosure volume for Infinity sub
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34587
Printed Date: May 09, 2024 at 11:29 AM
Topic: Enclosure volume for Infinity sub
Posted By: lensam69
Subject: Enclosure volume for Infinity sub
Date Posted: June 25, 2004 at 8:39 PM
From the manual specs for a sealed enclosure:
"Sealed box volume includes driver displacement 1 Ft^3"
Ok... I feel dumb today... Is that gross box volume (Make a box that has one cubic foot and place the driver in it).
Or net volume (Figure out driver volume, and make sure that 1 cubic foot remains in the box after driver is in)
-------------
forbidden wrote:
Wrong advice young grasshopper, go back to square one and do not pass go.
Replies:
Posted By: bberman1
Date Posted: June 25, 2004 at 8:45 PM
It's the total gross volume so you will want to build an enclosure 1 cu/ft.
Posted By: lensam69
Date Posted: June 25, 2004 at 8:53 PM
Thanks... just wanted to confirm that.
Measure, measure, measure, and then... measure some more. Then you build.
-------------
forbidden wrote:
Wrong advice young grasshopper, go back to square one and do not pass go.
|