output voltage on ford audiophile
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34612
Printed Date: May 12, 2025 at 11:59 PM
Topic: output voltage on ford audiophile
Posted By: jussam
Subject: output voltage on ford audiophile
Date Posted: June 26, 2004 at 5:27 AM
i want to set gains correctly can anyone tell me the voltage output for ford 2004 audiophile stock radio is it 4v,2v, 0r less
-------------
2-alpine amp mrv-f545 4ch amp
polk audio 6 1/2 frontdoor w/alpine center speaker
polk audio 6 1/2 rear w/8"polk sub
2-12" alpine X type sub
2-alpine mdr-1005 amps
Replies:
Posted By: haemphyst
Date Posted: June 26, 2004 at 9:12 AM
sorry, don't know WHERE that came from...
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: icu400
Date Posted: June 26, 2004 at 1:10 PM
There is an easier way to set your gain. Turn your radio up to the highest volume you would ever dream of listening to it at, or until there is any speaker distortion, then turn it down till it goes away. Thats your new max volume, remember that.
Then turn the gain up on the amp until you hear any distortion or the sound starts degrading. Turn it back down until it sounds good again and you are set. I am betting the audiophile system is probably 2v so your gain will probably end up somewhere in the middle.
|