Print Page | Close Window

overloaded amp!

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34626
Printed Date: July 15, 2025 at 4:20 PM


Topic: overloaded amp!

Posted By: gnevarez
Subject: overloaded amp!
Date Posted: June 26, 2004 at 1:25 PM

Hi guys, i have a hollywood soundlabs RHV-1200D ClassD, two Polk/Momo 4 ohm 12" SVC and 1 MTX Thunder 6000 12" 4 ohm DVC. Polks are parallel with each other, (2 ohm) and hooked up in one amp output, the MTX is paralleled (2 ohm) and hooked up in the other output. So the amp sees 1 ohm. The other day my amp went overloaded, everything looks fine, but it's not working, even after unplugging and plugging it all again it is still overloaded. What can i do???

help would really be appreciated



-------------
There's no future but what we make for ourselves



Replies:

Posted By: raydawg357
Date Posted: June 28, 2004 at 8:57 AM
Yes your amp is overloaded.  You have two options: 1.  Run only one pair of subs, or buy another amp to run the other two subs.

-------------
Do it right the first time


Print Page | Close Window