1994 nissan quest stereo
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34703
Printed Date: May 13, 2025 at 4:52 AM
Topic: 1994 nissan quest stereo
Posted By: jtsnike
Subject: 1994 nissan quest stereo
Date Posted: June 28, 2004 at 12:19 AM
yea i got one 1994 nissan quest...and trying to put a deck in. But the harness says ford so we got the ford(mercury villiger)..still the deck turns on but nothing to the speakers...so i was wondering if i can cut the factory grey harness(with speakers wires inside) and splice into those...but i need the diagram ..the one in this site is not correct...thanks
Replies:
Posted By: raydawg357
Date Posted: June 28, 2004 at 7:43 AM
Your quest has a factory amplifier and you can purchase a harness that will make to the gray harness. If you cut this harness and wire direct, you will loose your factory amplification. Purchase the correct harness and connect the blue wire to turn the amp on.
-------------
Do it right the first time
Posted By: jtsnike
Date Posted: June 28, 2004 at 3:10 PM
oh ok...but the problem is that i have teh harness that goes into the amp and still no work...wondering wat the bluue wire u are talking about...is that the the one from the deck??
Posted By: raydawg357
Date Posted: June 29, 2004 at 8:31 AM
Yes, depending on what deck you have, you will have a blue wire or a blue/white wire. You will need to hook this up to turn on your factory amp. If your deck has both, then connect the blue/white wire
-------------
Do it right the first time
|