CD deck sound problem

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34779
Printed Date: May 03, 2025 at 10:31 PM

Topic: CD deck sound problem

Posted By: m2k_us
Subject: CD deck sound problem
Date Posted: June 29, 2004 at 1:59 AM

I got a 1990 mustang lx convertible. I went to install a CD deck to replace the old factory radio and I used the correct quick connects to connect the new deck into the OEM factory wiring but when you go to use the unit nothing comes out of the speakers. The unit works fine power wise but no sound! Can anyone help me out or does anyone know what’s wrong

Unit= kenwood kdc-119

Car= 90 mustang lx

Replies:

Posted By: davids2004
Date Posted: June 29, 2004 at 5:41 AM

Check and make sure all your connections are correct. Make sure you matched up the correct dolor codes on the wires. Make sure all connections are tight.

Posted By: raydawg357
Date Posted: June 29, 2004 at 8:47 AM

Did you connect the blue wire to turn on the factory amp? Also check to make sure your mustang isn't common ground. If it is, you will have to run new speaker wire to each speaker.

-------------
Do it right the first time

Print Page | Close Window