Steering Wheel Controls and Non IR

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34956
Printed Date: May 15, 2025 at 10:07 AM

Topic: Steering Wheel Controls and Non IR

Posted By: mcgyver74
Subject: Steering Wheel Controls and Non IR
Date Posted: July 02, 2004 at 10:52 AM

Hey everyone,

I am installing a Pioneer AVIC-N1 in a Jeep Grand CHerokee (2001) and I want to be able to keep the steering wheel controls. The problem is that for some reason, Pioneer's flagship system does not have an IR remote or an IR receiver. it has an input for a wired remote

Has anyone been able to get steering wheel controls onto this unit? or am I SOL?

thanks

Replies:

Posted By: kevymac
Date Posted: July 29, 2004 at 7:51 PM

Hi,
I'm no audio expert.... in fact I'm quite a newbie. This particular product looks as if there is a plug for units that have a wired remote instead of an IR remote.
https://www.soundgate.com/products/remote-audio/chrysler.htm

-------------
If you think I can help, ask me... I'll try my best!

Posted By: mcgyver74
Date Posted: July 29, 2004 at 9:45 PM

Thanks for the reply. It is much appreciated.

After some searching, (And after we installed the unit) We discovered it does have an IR reciever. (the remote from my DEHP8600 works with it) So we are going to wire in and IR blaster remote to the SW controls.

Thanks again dude! :)

Print Page | Close Window