IS 300 install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35121
Printed Date: May 15, 2024 at 8:07 PM

Topic: IS 300 install

Posted By: prncrakim
Subject: IS 300 install
Date Posted: July 06, 2004 at 12:09 PM

i'm going to install my JL speakers into my lexus is 300. i have 6.5" (fronts) and 6 x 9" (rears). is there anything i need to know? can i just plug and play or will the factory amp be an issue. i will replace the factory amp at some point but i already own the speakers and just want to throw them in. just wanted to verify my approach with the experts so i did not screw up, thanks everyone.

-Jay

Replies:

Posted By: stevdart
Date Posted: July 06, 2004 at 8:34 PM

There should be no harm come to your new speakers, they being 4 ohm impedance. If the originals were 4 ohm, you'll just hear better sound. If the originals were 2 ohm, you'll hear better sound but not as loud.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window