Arc Audio 2100xxk

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35144
Printed Date: May 14, 2024 at 7:04 AM

Topic: Arc Audio 2100xxk

Posted By: markcars
Subject: Arc Audio 2100xxk
Date Posted: July 06, 2004 at 5:41 PM

Anyone has any opinions on this amp? It's for my sub.

I will be bridging it but never bridged an amp before. Also how do I make the connections to bridge it? As far as I can think, it should be a series like connection? Like using the + and - on the two different channels going straight to the speaker and the "middle" + and - shorted? Is that how it should be? I guess the manuals should have it too.

Replies:

Posted By: LAUR
Date Posted: July 06, 2004 at 6:18 PM

It is a series .+ from a chanell with +from another.but try to see manuals first

Posted By: stevdart
Date Posted: July 06, 2004 at 7:15 PM

The amp will show a diagram for wiring. It is the left pos and the right neg, and the middle two unused, like you thought. I don't know a thing about that amp.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: markcars
Date Posted: July 13, 2004 at 8:48 PM

The reviews show that its a very high end amp. I ordered one for my sub and yet to receive it and see how it works out.

Print Page | Close Window