Print Page | Close Window

Alpine wiring ?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35167
Printed Date: May 15, 2024 at 3:22 AM


Topic: Alpine wiring ?

Posted By: S.I.Autosports
Subject: Alpine wiring ?
Date Posted: July 07, 2004 at 1:37 AM

Any one have wiring info for a PXA-H Eq/Processor and the DVA-5205?  I bought these from a friend and he lost the manuals.  It seems pretty straitforward, but i would like to double check .  Thanks in advance.

-Tim




Replies:

Posted By: godsegoizhuge
Date Posted: July 07, 2004 at 7:50 AM
you can get the wiring info from alpine's website. If i remember correctly it's going to be under the support.




Posted By: chevyman26
Date Posted: July 07, 2004 at 8:25 AM
Go to www.alpine-usa.com , click on Tech Center on the top toolbar, then click on Consumer site, then on owners manuals, and you should be able to find whatever you need in downloadable PDF. (Sorry, I don't know how to set up a link directly to the page)

-------------
You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."




Posted By: S.I.Autosports
Date Posted: July 07, 2004 at 3:38 PM

I tried that, but couldn't find the wiring info.  The owners manuals were there, but didn't find wiring.

Just noticed i messed up the first post....it's a PXA-H510 and DVA-5205 and its all going to be hooked to a CVA-1006.





Posted By: chevyman26
Date Posted: July 08, 2004 at 7:59 AM

O.K.  do the same as above except instead of clicking on owners manuals, right below it is Product Feature & Specification sheets. Then click on Processors, then on Digital Processors. I was just looking at the diagrams you need on here.



-------------
You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."




Posted By: S.I.Autosports
Date Posted: July 08, 2004 at 12:59 PM

I don't know how i missed that section.  That was exactly what I was looking for.  Thanks for the help.

-Tim






Print Page | Close Window