Print Page | Close Window

L7 Advice

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35233
Printed Date: May 16, 2024 at 9:27 AM


Topic: L7 Advice

Posted By: Lucky95w
Subject: L7 Advice
Date Posted: July 08, 2004 at 10:15 AM

I am trying to design a sealed enclosure for a 12" L7 solo-baric in a 2001 Ext. cab Silverado. The problem I run into is finding the space while keeping the cab unharmed(removing seats, cutting or disassembly).

I have a couple enclosure drafted already, but I would like to piock the brains of you experts. :)

I am going to fabricate an enclosure this weekend so any ideas are welcome. 8-)

Thanks in advance,

Lucky



-------------
I find you lack of faith disturbing. ~Darth Vader



Replies:

Posted By: Lucky95w
Date Posted: July 08, 2004 at 10:18 AM

Heh, I almost forgot...The min. cu. ft. is .88 and the max. is 2.0 cu. ft.

Hope that helps.



-------------
I find you lack of faith disturbing. ~Darth Vader




Posted By: stevdart
Date Posted: July 08, 2004 at 9:15 PM
You should have plenty of room for a 2 ft enclosure in that extended cab.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.





Print Page | Close Window