Print Page | Close Window

can I bridge this connection?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35353
Printed Date: May 16, 2025 at 1:53 AM


Topic: can I bridge this connection?

Posted By: DaveH888
Subject: can I bridge this connection?
Date Posted: July 10, 2004 at 4:14 PM

I got two Rockford P110S8 speakers and a Kenwood 2 CH x 150W, 800W amp and want to know if I can bridge the connection.  the wiring guide says to do it like this [img]https://www.rockfordfosgate.com/rftech/wiringwizard/2_8ohmSVC_4ohm.gif[/img]

but I want to know if I can do it like this
[img]https://www.rockfordfosgate.com/rftech/wiringwizard/2_4ohmSVC_8ohm.gif[/img]

which will sound better? is there a chance I will damage the subs by bridging the connection?




Replies:

Posted By: DaveH888
Date Posted: July 10, 2004 at 4:17 PM

I want to know if I can wire it this way? (below)

posted_image

posted_image




Posted By: DaveH888
Date Posted: July 10, 2004 at 4:18 PM
the second, pic is the one I meant above, sorry



Posted By: forbidden
Date Posted: July 10, 2004 at 6:01 PM
If you have 2 single 8 ohm voice coil subs, then wire them as pic 1 shows and then wire to the bridged terminals on your amp.

-------------
Top Secret, I can tell you but then my wife will kill me.


Print Page | Close Window