does any have a kenwood kvt-911dvd in the car. if so , do u know the order of the wires that go behind the unit it self.
i know the colors are red,yellow,orange,black,and green. can sum 1 help... i have lost my harness
-------------
kvt-911dvd
2 Autotek Stealth xs.1500's
2 yellow top
2 MTX 3'' 2 ways
2 6x9 alpine type r's
2 15's poweramper xp^2
alpine mrv-f407 4 channel
150 amp anl fuse
Do you mean the plug that goes into the main brain box, it's just a standard Kenwood harness. If you mean the wire that interconnects the two boxes, your best bet is to order a replacement. Then there's the little power plug.
it is the power supply for the monitor it self
it is a 8 pin harness but only 5 wires come out of it
thanks..........Isaac
-------------
kvt-911dvd
2 Autotek Stealth xs.1500's
2 yellow top
2 MTX 3'' 2 ways
2 6x9 alpine type r's
2 15's poweramper xp^2
alpine mrv-f407 4 channel
150 amp anl fuse
I have one in my mustang. I don't recall the wires. But i do know all kenwoods use the same wire colors.
You should have a Black, yellow, red. Black is ground, and someone else chime in... yellow and red, one is 12+constant and one is switched 12+
What are the other two colors you have. I would assume one is a dimmer, and other is power antenea. But I don't remember
i know that red is switched power, yellow is constant, black is ground, orange is dimmer, and green is a ground also. i need to know the order of which these wires go in, i have lost my clip and i need to know the order.
-------------
kvt-911dvd
2 Autotek Stealth xs.1500's
2 yellow top
2 MTX 3'' 2 ways
2 6x9 alpine type r's
2 15's poweramper xp^2
alpine mrv-f407 4 channel
150 amp anl fuse