Radio removal in H2 hummer ’04

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35461
Printed Date: August 05, 2025 at 2:35 PM

Topic: Radio removal in H2 hummer ’04

Posted By: maximus32583
Subject: Radio removal in H2 hummer ’04
Date Posted: July 12, 2004 at 1:20 PM

Has anyone pulled a deck on a Hummer H2 '04? I seem to be catching something on the bottom. Does the cup holder next to the shifter need to come out? The posts on the bottom of the dash bezel are not coming out the way. It just needs to come out maybe 2mm or so. I can get the center console to come up but its also catching at the front. So I cant take it out. Any ideas?

Ryan

-------------
Maximus

Replies:

Posted By: kgerry
Date Posted: July 12, 2004 at 1:46 PM

you need to completely remote the center console in the Hummer H2 to remove the radio bezel....just did one the other day....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: kgerry
Date Posted: July 12, 2004 at 1:48 PM

there are 2 bolts under the shift gate area that you need to remove...remove the shift knob, remove the cupholder bezel around the shift plate and you'll find 2) 10mm bolts down there, remove them and the console will slide back allowing you to remove the radio bezel.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: maximus32583
Date Posted: July 27, 2004 at 2:27 PM

Yea it was the bezel around the shifter that got me. That F***ing thing did not want to come off. I thought for sure I was going to break it. If have to work on one. Dont bother with the bezel around the shifter its self (GM was nice enuff to make the edge a cheap chrome posted_image

) . Take out the main bezel. I SH** you not you will feel like you are going to break it. posted_image

I had to pry up one side with my fingers so I could fit my panel popper in. I said a prayer and pulled. Two clips on the front one in the back. bezel.So far I have had three now. Everyone has been kind of pain... Have fun... posted_image

-------------
Maximus

Posted By: kgerry
Date Posted: July 27, 2004 at 3:56 PM

i do lots of them and dont find them a pain at all....they are time consuming as heck, but that's it....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979