HU help needed with 03 Altima
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35473
Printed Date: August 10, 2025 at 12:26 PM
Topic: HU help needed with 03 Altima
Posted By: charlie101_1999
Subject: HU help needed with 03 Altima
Date Posted: July 12, 2004 at 5:08 PM
If any one can help... I have a 03 Altima with out the Bose. I tried hooking up my HU using the Scoshe kit and I couldn't get the HU and hole to line up. Theirs two sets of holes and one in the middle on the reciver bracket but none of them worked. Please help!
Replies:
Posted By: raydawg357
Date Posted: July 13, 2004 at 7:41 AM
I have an 03 Altima and didn't run into this problem. Are you sure you're using the correct kit?
-------------
Do it right the first time
Posted By: Alpine Guy
Date Posted: July 13, 2004 at 12:40 PM
can you snap a picture of your problem?
-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
Posted By: raydawg357
Date Posted: July 13, 2004 at 12:48 PM
Posted By: charlie101_1999
Date Posted: July 13, 2004 at 3:09 PM
This is the kit I have:
https://www.scosche.com/scosche/installation/kits/NN1496.asp[/URL]
Posted By: charlie101_1999
Date Posted: July 13, 2004 at 3:10 PM
Posted By: raydawg357
Date Posted: July 13, 2004 at 3:13 PM
That's the correct kit. Which holes are you refering too?
-------------
Do it right the first time
Posted By: kgerry
Date Posted: July 13, 2004 at 3:22 PM
are you trying to ISO mount this or with the sleeve? if with the sleeve you dont need to line up any screws on the chassis of the radio.....
-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: charlie101_1999
Date Posted: July 13, 2004 at 8:09 PM
I'm trying to use the two side brackets screwed into the side of the deck. I'm not useing the sleeve, it won't fit into the trim. The two side brackets have five holes each. Two on top two on bottom with one in the midle. I tried all the holes and no matter what, the deck won't line up with the hole of the trim.
Posted By: Drey
Date Posted: July 13, 2004 at 10:18 PM
maybe you have it upside down :)
Posted By: charlie101_1999
Date Posted: July 13, 2004 at 10:33 PM
DAMN! I didn't think about that....be right back
|