Kenwood KDC-MPV8025 Folding Problem

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35568
Printed Date: July 19, 2025 at 3:06 AM

Topic: Kenwood KDC-MPV8025 Folding Problem

Posted By: klutch
Subject: Kenwood KDC-MPV8025 Folding Problem
Date Posted: July 14, 2004 at 1:07 AM

Hello,

I recently purchased a Kenwood KDC-MPV8025 and noticed after installing that when I power off the vehicle and the face folds up for the "3D Mask" it don't pull in all the way. It's only about 1/4 of a inch off and you can just push it the rest of the way but thats annoying. I was wondering if there is some kind of adjustment? Or should I just return it for another one?

Thanks

Replies:

Posted By: rallysport
Date Posted: July 14, 2004 at 4:00 AM

kenwoods and face plates suck ass. have you tried resetting it? (unlpug power then plug it back in?) as far as i know there is no adjustment so if resetting doesnt work go get a new one.

-------------

Posted By: kgerry
Date Posted: July 14, 2004 at 9:47 AM

there is no user adjustment that i know of, but i've had to realign quite a few of those myself.... you may have to take it in for service or exchange

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Print Page | Close Window