Print Page | Close Window

Cruise Control

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35573
Printed Date: July 17, 2025 at 5:48 PM


Topic: Cruise Control

Posted By: braminator
Subject: Cruise Control
Date Posted: July 14, 2004 at 7:02 AM

Ok here is my problem.  I have zero feedback coming thru the speakers until I turn on cruise control and set it at speed.  Then I get a static sound coming thru the speakers and only when cruise control is set at speed.  Any ideas on this?



Replies:

Posted By: kgerry
Date Posted: July 14, 2004 at 1:01 PM
did you try filtering the VCC feed to the cruise module?  you may also want to check the supply ground to the module.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: kgerry
Date Posted: July 14, 2004 at 1:02 PM
just curious.... are you hearing this thru deck power or thru an amp?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: braminator
Date Posted: July 14, 2004 at 1:59 PM
I am not an installer so please talk laymans terms.  Yes I hear this thru the radio not the amp. And only when I set the cruise control.




Posted By: kgerry
Date Posted: July 14, 2004 at 2:41 PM
did you try filtering the power feed to the cruise module?  you may also want to check the supply ground to the module.....


-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: braminator
Date Posted: July 14, 2004 at 2:44 PM
My question is why would this start all of a sudden? I did not do the install so I do not know.




Posted By: kgerry
Date Posted: July 14, 2004 at 3:00 PM
possibly an OEM filter cap in the vehicle went open... it happens often enuff it's the first thing i would look at.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: braminator
Date Posted: July 14, 2004 at 3:01 PM
Is this something I can do or should I take it back to the installer?





Print Page | Close Window