2004 Tiburon, wire through firewall?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35757
Printed Date: May 14, 2025 at 1:11 AM

Topic: 2004 Tiburon, wire through firewall?

Posted By: Memphisman
Subject: 2004 Tiburon, wire through firewall?
Date Posted: July 17, 2004 at 9:27 PM

Anybody know a good place on the firewall to run wires thru on a 2004 Tiburon?

Replies:

Posted By: dc-auto
Date Posted: July 22, 2004 at 12:28 AM

If it is an automatic I usually look on the firewall where the clutch pedal would normally be. You can see the cut out for the clutch. Drill there. If it is a five speed then you may have some trouble. If I remember those firewalls are pretty crowded. Just look for any rubber gromet you can run your wire in.

-------------
dc-auto

Remember it's just Ohms Law

Posted By: Ravendarat
Date Posted: July 22, 2004 at 12:33 AM

I remeber having to go through on the passanger side on the standard version but I cant remember the exact place I went through. I am pretty sure I had to drill my own hole though

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: harvey1959
Date Posted: July 22, 2004 at 4:34 AM

Try the clutch pedal or where the speedometer cable goes, if there is one.

-------------
Harv

Posted By: thepencil
Date Posted: July 22, 2004 at 10:39 AM

Driver side, there is a rubber gromet and a cable. Drill it from there. Pull the rubber gromet out and drill behide it.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: Memphisman
Date Posted: July 22, 2004 at 5:54 PM

Thanks for the help.

Print Page | Close Window