98 range rover stereo wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35890
Printed Date: May 11, 2024 at 11:59 PM

Topic: 98 range rover stereo wiring

Posted By: 97gss
Subject: 98 range rover stereo wiring
Date Posted: July 20, 2004 at 2:12 PM

Anyone have a schematic for one of these? Problem is that I can't figure out if the factory amp(for the highs) is bad or the h.u. is bad. The owner is going to buy a new head unit but I still would need the schematic to wire into the factory amps or bypass them all together.

Replies:

Posted By: 97gss
Date Posted: July 28, 2004 at 2:23 PM

anyone? Someone out there has to have access to the audio wiring for one of these. I've done one before where I installed an aftermarket h.u. to run off the factory amps but I can't find my notebook where I wrote down the wire colors and locations.

Posted By: goldrodeo
Date Posted: July 29, 2004 at 5:14 AM

What model head unit is installed in this Rover? and how many plugs?

Posted By: autosound
Date Posted: July 29, 2004 at 2:35 PM

Depending on the vehicle ,The amp will possibly be in the rear passenger quarterpanel above a plastic tank ,,,I have known them to sometimes run a din amp lead to the back and come back to the front to pick up the speaker iso (8 pin connector)....

good luck (can't garantee spec as i am in UK)

Print Page | Close Window