Running the powerwire on a ’96 mazda 626

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36069
Printed Date: May 12, 2025 at 5:14 PM

Topic: Running the powerwire on a ’96 mazda 626

Posted By: turboman
Subject: Running the powerwire on a ’96 mazda 626
Date Posted: July 23, 2004 at 8:11 PM

hello all,

i am in the process of hooking up some minimal bass in my car. using a Boss RT335 250X2 and a pyle blue wave bandpass 500 watts. i got the scosche 550wiring kit. i need some help on where and how to run the power wire from the battery and into the car (not seeing an opening) and then also what would be the best way to run it to the trunk along with the RCA wire. should i do the power on one side and the rca on the other side of the car. thanks alot for any and all responses. ohh i'm using a sony cdx-ca900x headunit.

Replies:

Posted By: turboman
Date Posted: July 24, 2004 at 12:13 PM

anyone?

Posted By: stevdart
Date Posted: July 24, 2004 at 12:39 PM

https://www.crutchfieldadvisor.com/S-8pBCjclllvc/learningcenter/car/amplifiers_install_steps.html

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: turboman
Date Posted: July 24, 2004 at 3:48 PM

thanks alot. i found the platic cover for the hole to the engine.half way through with the install