safe to run infinity 6.5" in parallel?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36158
Printed Date: May 12, 2025 at 5:36 PM

Topic: safe to run infinity 6.5" in parallel?

Posted By: dudek38
Subject: safe to run infinity 6.5" in parallel?
Date Posted: July 25, 2004 at 8:38 PM

its safe to run infinity's (2 in each door) 63.5i's in parallel on 2 channels of a 4 ch amp with the gain lower right?
im just trying to eliminate running an extra set of speaker wires.

-------------
owner of
Motion Marine & Car Audio
the florida keys

Replies:

Posted By: DYohn
Date Posted: July 26, 2004 at 8:26 AM

Gain should be set to match the head unit, it has nothing to do with the speaker loading. If the amp can handle a 2-ohm per channel load at an RMS power level less than the combined RMS rating of the speakers, and you don't care about fading between the speakers, then go for it.

-------------
Support the12volt.com

Print Page | Close Window