Dual Amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3629
Printed Date: July 21, 2025 at 12:43 AM

Topic: Dual Amps

Posted By: Omar
Subject: Dual Amps
Date Posted: September 14, 2002 at 3:21 PM

I have a 95 Chevy S-10 Blazer with Kenwood CD head unit, Front 51/4, Rear 61/2 Pioneers, Dash 4x6. The dash is powered by the head unit with the front and rears powered by an Eclipse 4 channel which also powers a JL 12" sub. My question is, I have a 2 channel Eclipse that I plan to add to the system to power my present sub along with another JL 12" that I purchased. How do I connect the two amps together (line level inputs)? Also, do you recommend a cap?

Replies:

Posted By: Velocity Motors
Date Posted: September 14, 2002 at 3:29 PM

Is there not a line output on the Eclipse amplifier ? If not the Kenwood deck....does it have dual pre-outs or single ? If single just use " Y " adaptors to split the signal. Use a cap if you can afford to.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window