97 mountaineer stereo
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36401
Printed Date: May 14, 2024 at 12:55 PM
Topic: 97 mountaineer stereo
Posted By: beaker
Subject: 97 mountaineer stereo
Date Posted: July 29, 2004 at 11:40 AM
First off hi. i have been reading you forums for a while now and i find everyone's iformation very useful. the whitestange one was very funny. any ways i will be installing a system into my 97 mountaineer. i have the jbl system in there now with the rear sub, this is the facory setup, it also includes two rear mounted amps one for the sub and the other for the rest of the system. i will be replacing the rear mounted 8 in with a 12 in custom box and new amp. this part i know how to do. my qurestion is when i replace the amp for the rest of the speakers i can not find any wiring breakouts for it and there is like 30 wires going to this amp, well ok maby not like 30 but still a lot. any help would be appreciated. i will be installing late august, we have family visiting right now and the wife wont let me play with my toys for now.
-------------
-Individuality-
Always remember that you are unique, just like everybody else.
Replies:
Posted By: raydawg357
Date Posted: July 30, 2004 at 1:55 PM
Run new wires from your HU or purchase the amp bypass harness sold at most install bays.
-------------
Do it right the first time
Posted By: beaker
Date Posted: August 02, 2004 at 6:08 PM
thanks, i will probably just end up running new wires.
-------------
-Individuality-
Always remember that you are unique, just like everybody else.
Posted By: beaker
Date Posted: August 02, 2004 at 6:09 PM
thanks
-------------
-Individuality-
Always remember that you are unique, just like everybody else.
|