Hey guy's,
I am thinking about buying a Cadence Q400 4-cahnnel amp off of E-Bay. Anyone have any experience with these?
-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
I am getting it for $60, it is a refurbished unit. I figure for $60, what the hell.
-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
Here is the link to the auction:
https://cgi.ebay.com/dll?ViewItem&item=5713184609&ssPageName=ADME:B:EOAB:US:6-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
This amp is one of the older ones by Cadence around 1999. It pushes real clean power and if you are using it to play your mid-highs it should be a good choice. It won't do much justice to subs but is good looking since it is chrome.
Thanks for the info guy's. I am gonna use it to power the mains and rears. Hope it sounds good

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
I had a cadence z100 "overdrive" amp pushing a Dr. Crankenstein 10". That was eons ago, but man did it sound good. I can't find any dealers up here in canuckville that sell em though. :(
I am not looking to push my subs with it. But, pushing a set of MTX thunder 6000 components and MA 6.5 two ways. I will let you know how it sounds once I get it hooked up.
-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds