Print Page | Close Window

Difference between Alpine 3522 and 3522s?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37114
Printed Date: May 11, 2025 at 1:34 AM


Topic: Difference between Alpine 3522 and 3522s?

Posted By: customsuburb
Subject: Difference between Alpine 3522 and 3522s?
Date Posted: August 10, 2004 at 10:58 AM

Is their any differences between these two old school alpine amps? The only difference I see is that the 3522 uses a wiring harness and the 3522s dosn't.

-------------



Replies:

Posted By: customsuburb
Date Posted: August 10, 2004 at 5:22 PM

Dosn't anyone have experience with either of these amps?



-------------




Posted By: racer427
Date Posted: August 10, 2004 at 6:17 PM
I have had experience with the 3522, I think the only difference is the wireing harness. I have looked the amp up on the net and thats the only difference I see.

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds




Posted By: racer427
Date Posted: August 10, 2004 at 6:20 PM
The 3522 is a very good strong dependable amp too. I purchased one back in the early 90's and it is still going in my brother-in-laws truck.

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds




Posted By: customsuburb
Date Posted: August 11, 2004 at 9:45 AM

Does it sound nice?



-------------




Posted By: racer427
Date Posted: August 11, 2004 at 2:37 PM
As far as I remember it was a very clean sounding amp.

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds




Posted By: Alpine Guy
Date Posted: August 11, 2004 at 11:44 PM

i had one,,,,till sum HATER stole it, and my Bass 200 sub errr, i loathe the day that Biatch brings MY stuff in to get installed, , ohhh i'll install it alright, ohhhhhohohohohoh

best amp iv owned by the wayposted_image   Whell, close haha

1 problem tho, ,its super old school, , from back in the 1 v input days, , a 5v HU will hurt it.



-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.




Posted By: customsuburb
Date Posted: August 12, 2004 at 8:52 AM

https://cgi.ebay.com/ebaymotors/dll?ViewItem&rd=1&item=7915593757&category=38638 

I was reading the lable on the bottom of it (the 3522s) and it says made in korea unlike the 3522 which I'm pretty sure is made in japan. Is this still a good amp?



-------------




Posted By: customsuburb
Date Posted: August 12, 2004 at 6:27 PM

anyone?



-------------




Posted By: shredder130
Date Posted: August 14, 2004 at 9:45 AM
i have an alpine 3522 amp running my mids and highs, its a very clean soudnding amp, i did have to cut off the molex connectors and solder wires to hook it up, i got the amp for free minus the harnesses





Print Page | Close Window