1993 toyota camry, hole in firewall?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37148
Printed Date: July 05, 2025 at 1:42 PM
Topic: 1993 toyota camry, hole in firewall?
Posted By: pdiddy37
Subject: 1993 toyota camry, hole in firewall?
Date Posted: August 10, 2004 at 10:56 PM
i have a 1993 toyota camry sedan and i am having trouble locating an existing hole in the firewall to go through with my power cable...i think i've found a good spot to drill a hole but don't want to if i don't have to...if anyone can help, that'd be great...thanks a lot
Replies:
Posted By: raydawg357
Date Posted: August 11, 2004 at 11:15 AM
Check under the hood along the firewall for a wire gromet, if you can't find one, you might have to drill. Be carefull and check both sides before drilling.
-------------
Do it right the first time
Posted By: pdiddy37
Date Posted: August 11, 2004 at 1:48 PM
what is the best way to go about finding an existing hole??? should i get underneath the car...because i'm having trouble seeing a lot from just looking under the hood
Posted By: mazaraki
Date Posted: August 11, 2004 at 2:14 PM
get under the dash and look ------------- Those that say it can't be done.....Need to get out of the way for those that are doing it!!!
Posted By: evanc
Date Posted: August 11, 2004 at 3:31 PM
I had the same problem working on a buddies of my car. I could not find one to run a simple strand of 8 gauge through. I had to drill, but be sure to seal it off with some silicone or something as well as a gromet.
Posted By: pdiddy37
Date Posted: August 12, 2004 at 1:27 PM
yea, i ended up just drilling a hole and it worked out just fine...subs sound great...i'll have to make sure and seal the hole though
|