how do i cut these angles?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37193
Printed Date: April 28, 2024 at 9:17 PM

Topic: how do i cut these angles?

Posted By: bigblackhoe
Subject: how do i cut these angles?
Date Posted: August 11, 2004 at 5:10 PM

what tool would i use and how would i go about cutting the end of a piece of mdf to lay flush with another when they are at an angle to each other?

Replies:

Posted By: mj239air
Date Posted: August 11, 2004 at 6:54 PM

table saw

Posted By: Alpine Guy
Date Posted: August 11, 2004 at 11:53 PM

theres a tool magig thing that you can use to mate up to the angle, tighten it, , then transfer the angle to your table saw, , i'll see if i can find the tool online.

-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.

Print Page | Close Window