Print Page | Close Window

Solved my previous dilemma

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37202
Printed Date: April 18, 2024 at 11:40 PM


Topic: Solved my previous dilemma

Posted By: pookz
Subject: Solved my previous dilemma
Date Posted: August 11, 2004 at 7:41 PM

I had a question about running an amp in a weird way to make it see 2ohm stereo on a single dvc sub... Probably wasn't goin to work!

Now, though, I just found a killer amp. I just picked up a McIntosh MC443 amp for $150 at my local cash converters!! Stupid losers have no clue what they're selling. I always knew it was a good brand, but I always have seen outrageous prices with them! Anyways, this amp is rated at 300w x 1 into 4 ohm, and 500w x 1 into 2 ohm, and yes it is 2 ohm mono stable... (it is a mono amp)

Just to let you know, if anyone lives near Brampton, Ontario, go to the cash converters on queen st. They have a PPI amp there too. I believe it's a 5 channel with the optional q-bass controller.

Now, I get to test my theory of crosswiring my amp to drop it to 2 ohms!! FUN FUN FUN...




Replies:

Posted By: stevdart
Date Posted: August 11, 2004 at 8:37 PM

How does the diagram look this time....better than this?  (RE:  this previous post) 

(I'm still scratching my head to figure this one out...lol)

posted_image



-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.




Print Page | Close Window