2000 bonneville, stereo, noise

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37278
Printed Date: October 31, 2025 at 7:10 AM

Topic: 2000 bonneville, stereo, noise

Posted By: SPLICER
Subject: 2000 bonneville, stereo, noise
Date Posted: August 12, 2004 at 10:36 PM

I'm installing a kenwood 4042 eq and two fosgate amps one 500a2 and a 400a4 using the factory stereo with a pac high/low converter, other than the loud hissing when the stereos off or on and the annoying engine noise the stereo also has a door bell chime thing going on and i need to know 1. how to get rid of the hissing 2.the chimes and 3. the good old engine noise help me out please this install is killing me

Replies:

Posted By: Velocity Motors
Date Posted: August 12, 2004 at 10:40 PM

Where did you grab the input signal from for the converter ? Did you ground the converter ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window