Print Page | Close Window

Kenwood Excelons ported?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37354
Printed Date: July 04, 2025 at 6:41 AM


Topic: Kenwood Excelons ported?

Posted By: robb420in323
Subject: Kenwood Excelons ported?
Date Posted: August 13, 2004 at 10:53 PM

I have a set of Excelon DVC KFC-XW1025dB 's in a sealed box. the customer

absoulty must have a port... :o)

Are the subs good for use in a ported box.. its no where on the Kenwood site.

Im basically looking for port lengths and placement..

There being installed in a Denalli

Thanks



-------------
Hunter S. Thompson for sheriff



Replies:

Posted By: auex
Date Posted: August 13, 2004 at 11:15 PM
All the parameters are listed on Kenwood.com. Take the information and plug it into a box program like WinISD. This is the best way to get your dimensions and it allows you to tune the enclosure to the way you would like. Lets say you use a 1.5 ft3 box tuned to 50htz you would need a 4 inch port 8.25 inches long. It looks like you would get a 6db boost at 50 htz with this box. But you would need play with it for a while to get used to it. By the way, tell the customer that it will probably sound like crap.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.


Print Page | Close Window