installing second amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37378
Printed Date: May 11, 2025 at 7:03 PM
Topic: installing second amp
Posted By: pimpincavy
Subject: installing second amp
Date Posted: August 14, 2004 at 10:35 AM
Im going to install 2 Kenwood 6X9s to a Memphis 250W amp in the rear of my car (all i ahve up front is 3.5", so no point in amping them). I have a few questions about the installation.
1. Should i run a new RCA cable to the other port on my hu, or should i daisy chain it to my other amp?
2. Do i just splice the amp turn on wire to the wire on my other amp?
3. Do I need a fuse for this amp? Its 250W, has a 20A fuse and im using 8g. wire.
4. All I have is 12G. wire and 18G. for speaker wire, should I get something in between them?
5. Will I get more sound if i cut holes in the rear shelf thing for the speakers?
I currently dont have alot of mids in my car, im hoping these speakers will help.
-------------
Replies:
Posted By: furflier
Date Posted: August 14, 2004 at 10:39 AM
1-yes 2-yes 3-yes 4-no 5-yes -------------
|