Print Page | Close Window

2 amp problems

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37648
Printed Date: July 15, 2025 at 1:13 AM


Topic: 2 amp problems

Posted By: BakedNamma
Subject: 2 amp problems
Date Posted: August 18, 2004 at 5:15 AM

Hey guys.. i am new to the forums here and this is my first post so bear with me please...;)

I have a PG xs 2500...  as soon as i hook up the power wire and ground both fuses blow on the amp...  i opened up the amp and i can see a tiny blue thing that looks like a resistor that seems burnt...  if i fix that one part will my amp work again?

I also have a MRD500.  a E3 error came on. it means excessive current. it says to find and emilinate that problem. it is in protection mode so cant be used...  anyone have any ideas? thnk




Replies:

Posted By: customsuburb
Date Posted: August 18, 2004 at 8:33 AM

Take your PG amp into a repair shop and have them look at it. E3 error means that you are placing too low of an ohm load on the amp. What subs do you have and how are they wired?



-------------


Print Page | Close Window