Problems with cadence 4ch

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37680
Printed Date: May 15, 2024 at 7:15 AM

Topic: Problems with cadence 4ch

Posted By: racer427
Subject: Problems with cadence 4ch
Date Posted: August 18, 2004 at 4:08 PM

Hey guys,

Got my new Cadence 4ch amp hooked up finally today. Having a problem though. I have it set to 4 channel mode and only have channles 1&2 hooked up at the moment to the mains. I am only getting a signal out of channel 1 and not 2 . The RCA connections are fine as I switched them to make sure. What could be the problem? Oh Yeah, I did check both sets of speakers to assure propper hook up there as well. Could the amp be bad?

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds

Replies:

Posted By: DYohn
Date Posted: August 18, 2004 at 4:41 PM

Yes, could be. Try 3 and 4.

-------------
Support the12volt.com

Posted By: racer427
Date Posted: August 18, 2004 at 5:19 PM

Thanks DYhon, I figured it out. MY BAD, when reinstalling the head unit the other day, I, somehow pulled one of the rca's partially out of the unit. All is good and this is a great amp.

-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds