power connections on amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37730
Printed Date: July 13, 2025 at 9:37 AM

Topic: power connections on amp

Posted By: pmpamf
Subject: power connections on amp
Date Posted: August 19, 2004 at 10:44 AM

Hey all.....I have an MMATS LM2100 2ch amp, not sure what has happened to the connecting posts for the power & ground though, does anyone know what/where to get replacements or if there is a way to connect to it w/o having those terminals? I tried contacting MMATS already, but they still haven't responded so I figured i'd try here since this generally seems to be more help than contacting manufacturers, Thanks in advance for any assistance!!

Replies:

Posted By: stevdart
Date Posted: August 19, 2004 at 7:54 PM

Anytime I need a specific theaded screw I take whatever it is I have into Sears hardware and go to the nuts and bolts section and try different screws until I find what works. You can use spade connectors once you get machine screws that fit the amp.

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window