custom sub box design
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38241
Printed Date: July 14, 2025 at 2:19 PM
Topic: custom sub box design
Posted By: makaveliwi
Subject: custom sub box design
Date Posted: August 28, 2004 at 4:35 PM
I want to build a custom box into the wheel wheel in the trunk of a 1994 toyota camry, any suggestions?
-------------
milwaukee walt
Replies:
Posted By: 04ramsrt10
Date Posted: August 28, 2004 at 9:12 PM
fiberglass
Posted By: jeffchilcott
Date Posted: August 28, 2004 at 9:16 PM
for what kind of subs? looking to go sealed or vented? SQ or SPL? many questions so little answers...i would build a skeleton frame remove it and make glass molds of your space then assemble around the frame
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: makaveliwi
Date Posted: August 30, 2004 at 10:02 PM
MTX Thunder 6000, 1 sub. don't want a whole lot of bass but I want it to look good. I already have the designs for my amp rack, just need suggestions on how to build a box to custom fit in the side of a 1994 toyota camry in the trunk around the wheel well. what materials should I use and what type of box would make this sound good. I am also powering it with a Punch amp. 900Wx1.
-------------
milwaukee walt
|