Enclosure sealant
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38324
Printed Date: May 21, 2024 at 3:07 PM
Topic: Enclosure sealant
Posted By: chevyman26
Subject: Enclosure sealant
Date Posted: August 30, 2004 at 4:00 AM
So, what do the guys that do it for a living use as sealant at the seams in a new built enclosure? I plan to use glue and screws in the construction of the box, but I want to be sure the seams are 100% airtight. Thanks.
------------- You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."
Replies:
Posted By: DYohn
Date Posted: August 30, 2004 at 8:15 AM
Silicone rubber sealant, also known as RTV. ------------- Support the12volt.com
Posted By: auex
Date Posted: August 30, 2004 at 8:56 AM
I use fiberglass resin on my personal enclosures, then again they are fiberglass.
------------- Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: Ravendarat
Date Posted: August 30, 2004 at 10:01 AM
I use fiberglass resign on my enclosures when I have the time and the feel like getting higher than a damn kite. When I dont I agree with DYohn and use RTV sealant.
------------- double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Posted By: /R7
Date Posted: August 30, 2004 at 1:29 PM
i dont doit for a living, but i've found Weld-Bond to be a great adhesive my attempts to pull 2 boards apart with 2 people pulling failed, and this was without screws, but normally i'll use a #10 wood screw for extra strength.
Posted By: chevyman26
Date Posted: August 30, 2004 at 2:41 PM
Great! Being a mechanic, RTV was #1 on my list of ideas to use, and I have more on hand than any one man should, lol. I actually just used some the other day on my sis-in-law's box which had split at the seams from moisture (yeah, there's even mold growing on the subs and enclosure.) I will be building her a new box shortly (and 2 for myself), and just wondered what the pros use. Thanks for all the input!
------------- You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."
Posted By: Alpine Guy
Date Posted: August 30, 2004 at 2:52 PM
Glue, and screws, , let the glue dry for a hour, ,then use caulking on every edge. Thats what i do. Works pretty good.
------------- 2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
Posted By: Djmajicmark1
Date Posted: August 30, 2004 at 3:09 PM
The 2 that I have build I use liquid nails on the joints before i screw it(run a bead on the wood, place the wood on top and screw), then I will run a bead on the inside just like im sure everyone runs the RTV or whatever else they use.
Posted By: mobile E
Date Posted: August 31, 2004 at 1:28 AM
agreeed but for the box glue i use polyurithane construction grade anheasive.. sorry its dark and i cant see the key board.. ------------- everything stolen :(
Workin on a new system :)
Peace in the middle east
Posted By: chuckt504
Date Posted: August 31, 2004 at 3:54 AM
Don't forget to wait 24 hours is you use silicon to put the speakers in. The fumes silcon puts out when drying can eat the surroundings of speaker and subs
|