Hey guy's,
Just woundering if anyone has or has had any exerience with the above mentioned or any of Bazookas amps. Ok? sh*ty? My buddy has this one he wants to sell as he needs the money and the power rating seems to be just right for my MTX 8000 10" er's.
Also, this amp has a set of full range preamp outputs. Would it be safe to say that I could use the crossover in the amp and run the preamp outputs to my Candence 4 channel via y connectors?
-------------
Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
Since he's your buddy he should be okay with you setting up the amp and measuring its output to make sure it will power your subs properly. That would make it a "conditional" purchase. And yes, the output won't be affected by the amp's crossover settings.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
I would try it out first I know the 8000's take alot more power then recommended, but just the RMS rating is good enough for some, yes running the full range output will be fine as long as your cadence has an eq to adujst the frequency's.
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place