Print Page | Close Window

Mobile DVD player/bypass safety feature?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38448
Printed Date: May 21, 2024 at 2:41 PM


Topic: Mobile DVD player/bypass safety feature?

Posted By: eastwest2300
Subject: Mobile DVD player/bypass safety feature?
Date Posted: September 01, 2004 at 1:05 PM

Hey yall, I got a Pioneer Touchscreen DVD Player, and I haven't installed it yet, my question is this, how do I bypass that safety feature to where The player will play dvd's when the vehicle is being driven. The deck has a wire that is suppose to run to the E-brake, and the dvd player will only play when the vehicle has the e-brake applied.. any ideas?

Please send me an e-mail: eastwest2300@yahoo.com
I would greatly appreciate it..
dee



Replies:

Posted By: auex
Date Posted: September 01, 2004 at 6:45 PM
All you have to do is push the e-brake all the way down while driving.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: jeffchilcott
Date Posted: September 01, 2004 at 9:38 PM
hmm jamming on the ebrake while driving      dosent sound right, but hey it might just work.    no really find out weather the wire is 12+ or ground then find a wire that has the same source as needed and wire to it

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place




Posted By: auex
Date Posted: September 01, 2004 at 9:52 PM
I think my idea is more fun, to watch at least.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: fredisfound
Date Posted: September 02, 2004 at 6:40 AM
That wire is going to ground when the handbrake is on, so just ground that wire and all will work.





Print Page | Close Window