stock dash speaker location or kicks
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38558
Printed Date: May 19, 2024 at 3:45 AM
Topic: stock dash speaker location or kicks
Posted By: bp_viper
Subject: stock dash speaker location or kicks
Date Posted: September 03, 2004 at 10:06 PM
i have a 94 s10 blazer and was wondering what your opinions are between keeping the stock dash location with 4x6 speakers or if i should make some kick pods with 5 1/4 components. i saw some 4x6 infinity's i think that have like a 3" midbass with a tweet like a comp. set that i would probly get if i keep that location. what do you guys think?
Replies:
Posted By: pimpincavy
Date Posted: September 03, 2004 at 10:11 PM
Do both, lol.
-------------
Posted By: chevyman26
Date Posted: September 04, 2004 at 7:41 AM
I agree. It sounds so much better to have the music coming from above and below. If budget is a concern, leave the stock dash speaks. in and add the kicks for now, then replace the stocks when you can afford it.
-------------
You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."
Posted By: bp_viper
Date Posted: September 04, 2004 at 7:45 AM
if it makes any difference i am planning on 5 1/4 in the b-pillar on the bottom behind the front seats also. its not that money is a concern, just that i want it to sound "right" would the 3 sets of speaks be better than just the 2. 1 set up front and 1 in back, or should i just put 2 sets up front and none behind the driver seat? thanks for the suggestions. also, if i keep the stock dash location, anyone know of a good 4x6 speak?
Posted By: chevyman26
Date Posted: September 04, 2004 at 8:09 AM
Isn't there already stock rears in the blazer?
-------------
You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."
Posted By: bp_viper
Date Posted: September 04, 2004 at 9:42 AM
yeah, in the rear doors, but i am moving them forward about a foot to the b-pillar to accomodate 5 1/4 components. just another excuse to do some fiberglassin :D
|