US Amps, Any Good Deals? Where?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=38633
Printed Date: May 15, 2024 at 1:52 PM

Topic: US Amps, Any Good Deals? Where?

Posted By: MBZ oe
Subject: US Amps, Any Good Deals? Where?
Date Posted: September 05, 2004 at 1:30 PM

Hey All

I am in search of a good deal on a US Amps USA 3000, or at the minimum, USA 2000.

Anyone here have one of these to sell or know where to get a good deal on one?

I need 2000-3000 watts to really power the RFR3110's, as they want 1000rms and 2000peak.

I am still open to other amp suggestions to replace my 2 kicker 1200.1's for the same power in one block, instead of two. The only other requirement is that the company has a good matching 4 channel amp with front and rear built in high pass crossovers.

-------------
BOOM, BOOM, BOOM BOOM....

Replies:

Posted By: six2six
Date Posted: September 06, 2004 at 2:14 AM

you selling the 1200.1?

Posted By: six2six
Date Posted: September 06, 2004 at 2:14 AM

you selling the 1200.1?

Posted By: MBZ oe
Date Posted: September 06, 2004 at 3:07 AM

I will be selling both 1200.1's and the 300.4 soon. The 1200.1's have Kicker Birth certificates that certify that they put out 1550, and 1575 watts peak.

-------------
BOOM, BOOM, BOOM BOOM....

Posted By: Audiobahn1500
Date Posted: September 06, 2004 at 12:13 PM

How much you going to be selling them for cause i would like one if there not to much

Posted By: MBZ oe
Date Posted: September 06, 2004 at 5:30 PM

PM me your e-mail adress so I can let you know in a couple weeks when I take them out. Just to let you know, the 1200.1's have dynamat xtreme on the backside of front cover to eliminate rattle. That means that there is a little dynamat-black residue visible when you remove front cover to access terminals. It is 100% not visible when cover is in place. Just wanted to let you know ahead of time. These are some BIG and BAD AMPS....) 0/1GA and 150amp fuse is needed for each. The only reason I am swapping them out is to get either 3000 or 6000 watts in one amp( US 3000 or US6000).

-------------
BOOM, BOOM, BOOM BOOM....