Print Page | Close Window

Cleaning up power supply

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39079
Printed Date: October 31, 2024 at 6:12 PM


Topic: Cleaning up power supply

Posted By: Farwell
Subject: Cleaning up power supply
Date Posted: September 13, 2004 at 2:23 PM

I tapped the cig lighter (at the fuse box using Add a Circuit) to power an aux. input device.  When aux. inputs are played (dvd sound) the quality isn't as good as when the HU cd plays.  Do you think this is a function of a crappy aux. input device (Soungate SDS1) or is "noise" coming in through the power to the SDS1?  Or something else?  I have short grounds on the dvd/lcd screen to one spot etc.  Is there a device I can add to the power supply that will clean it up? 



Replies:

Posted By: Jay T
Date Posted: September 13, 2004 at 9:49 PM

"tapped" from cig lighter might be the problem. Try another power source IE; Straight off the batery or something similar to see if it cleans up.  Double check grounds for good clean connections.

I had a Power Acoustik DVD player that just wouldn't come through clean no matter what I did.  One or two lines of distortion on the top of my LCD and lots of audio noise.  Hooked up a PS2 through a power inverter and everything is clean.  So it could very well be the product itself in my opinion. 






Print Page | Close Window