I've bought a Commando FM-870 Remote starter/alarm and need to get the color codes for my 2004 4Runner,IE Ignition/Imobilizer/door locks/windows. If anyone can help I would be appreciative.
Well, 2 things. First this is the "Car Audio" forum. Second, Use the
Search Button, grasshopper.
Incase you can't find it there, respond and I will post a link to the info. Damn computer is acting up and won't open links correctly.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Also, the 2003 is simliar ton the o4 in wiring, just need to check the rear speaker for color wiring and the stock to match them.
Sorry I didn't see that this was a paticular forum when I posted the original question.
I finally found this much on another web site, but if any one has the color codes for the transponder module, I still need them.
DesignTech International, Inc. - Web Support
DesignTech disclaims any liability or responsibility arising out of any inaccuracies of this information or use of this
information for installations or otherwise. Please verify all wiring for accuracy prior to making any connections.
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | GREEN/ Black (+) | Ignition switch harness |
Ignition #1: | | BLACK/ Red (+) | Ignition switch harness* |
Ignition #2: | | Blue / YELLOW (+) | Ignition switch harness |
Ignition #3: | | GREEN/ YELLOW (-) | Keysense wire** |
Accessory: | | WHITE/ Green (+) | Ignition switch harness |
Brake Light: | | GREEN/ YELLOW (+) | Back of the fuse box |
Tach Signal: | | N/A | |
Parking Lights: | | Green (+) | Drivers kick panel harness to the rear |
Headlights: | | N/A | |
OEM Alarm Disarm: | | N/A | |
OEM Alarm Arm: | | N/A | |
Diesel Glow Plug: | | N/A | |
Clutch Bypass Wire: | | N/A | |
Notes: | | *This vehicle is equipped with a Transponder Anti-Theft Security System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number.**Will disarm factory alarm without unlocking doors. |
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | WHITE/ Blue (+) | Ignition switch harness |
Starter Kill: | | GREEN/ Black (+) | Ignition switch harness |
Ignition +12 Volts: | | BLACK/ Red (+) | Ignition switch harness* |
Dome Lights/Superv: | | White (-) | Plug to right of fuse box |
OEM Horn: | | GREEN/ Red (-) | Steering Column |
Power Lock: | | Blue (-) | Drivers kick panel door harness*** |
Power Unlock: | | Green (-) | Drivers kick panel door harness*** |
Trunk Release: | | N/A | |
Alarm Input Wire: | | White (-) | Plug to right of fuse box |
Notes: | | ***See Note #201 Negative Trigger Door Locks |
DesignTech International, Inc. | Tel: (703) 866-2000 Fax: (703) 866-2001 | ©2002 All Rights Reserved |
7955 Cameron Brown Court
Springfield, Virginia 22153 USA | 1-800-DESIGNTECH
(1-800-337-4468) | DesignTech International, Inc.
www.designtech-intl.com |
DesignTech disclaims any liability or responsibility arising out of any inaccuracies of this information or use of this
information for installations or otherwise. Please verify all wiring for accuracy prior to making any connections. |