subs with 4 channel

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39285
Printed Date: May 19, 2024 at 3:47 PM

Topic: subs with 4 channel

Posted By: Pass the Roc
Subject: subs with 4 channel
Date Posted: September 17, 2004 at 2:47 PM

ok i have 2 pioneer subs at 4 ohm. and an mtx 4 channel amp at 200 watts 4ohm bridged. now i want to bridge both subs into this amp. but my deck only has one subwoofer output for rca. so i can only get one of my subs pounding. how do i get both to work?

Replies:

Posted By: KPottsie78
Date Posted: September 17, 2004 at 3:39 PM

use y-splitters on the rca's. or a lot of 4 channel amps have a switch on them to select 4 channel input or 2 channel input. If it has that just select 2 channel input.

Posted By: Pass the Roc
Date Posted: September 17, 2004 at 3:53 PM

i must need the splitters because i tired the 2 channel out put and it still didnt work

Print Page | Close Window